Discussions and queries about ThunderBorg and MonsterBorg.
Submitted by crazycga on Thu, 03/25/2021 - 14:11
Hello everyone!
I'm proud to announce that ThunderSharp - a .NET library for the ThunderBorg is now available! You can get it through NuGet if you just want the library at:
Install-Package ThunderSharpLibrary
The library itself and the project is available at:
https://github.com/crazycga/ThunderSharp
Post here for queries regarding setup problems.
We recommend you try using the troubleshooting instructions here first if you have not already.
Please try to list as much about the problem as you can (OS distribution, versions, motor setup et cetera), the more we know the easier it is to help :)
Please post any examples you would like to share with other ThunderBorg or MonsterBorg owners here :)
Submitted by Devil p on Fri, 12/01/2023 - 15:04
I recharged the batteries and when I put them back on and switch on the Monsterborg the lights start flickering through all colors. (No WLAN connection) I suspected a voltage or connection problem but can not find a solution ???
The battery level is at 12V and the connection seems to be o.k.
Any advice where to look and what to try.
Submitted by bobrich on Thu, 10/05/2023 - 12:03
I have a Thunderborg and two of the 35v capacitors have unfortunately been knocked slightly and have completely detached themselves from the board. Is there any way that they could be reattached as the capacitors themselves appear undamaged.
Submitted by Devil p on Thu, 05/04/2023 - 17:42
After I installed an OLED display I got frequent VNC break downs when running the Monsterborg.
I suspected due to not sufficient power, I therefore deinstalled the display, no I can't connect to the
Thunderborg:
Submitted by danesh on Wed, 03/29/2023 - 00:57
Hi,
I would like to connect a compass (CMPS14) to my Monsterborg robot's Pi, ideally via I2C or else serially. As the Thunderborg motor controller also powers the Pi, can you please share the male/female layout for the 6 connections of the Monsterborg.
Thanks!
-
Submitted by Devil p on Sun, 03/19/2023 - 11:59
I built a voice-controlled monsterborg, the project worked well.
Yesterday I put the monster on a sideboard to switch it off (headless).
Unfortunately it "heard" something from somewhere and drove over the cliff.
Everything survived the 1.5 m fall, except the chassis got bent.
Do you have by chance a spare chassis? I would appreciate, thanks!
Submitted by ivans312 on Sat, 01/28/2023 - 05:12
Submitted by Devil p on Mon, 01/23/2023 - 15:43
I used the Monsterborg for years now, big fun!
Today during running a new project, all of a sudden it stopped and only the
green LED is flashing some time.
Tried reboot several times no success??!!
Any advice Thanks
Sorry, more precise:
the Monster is still running o.k., just the LEDs are dead
Pages
