Discussions and queries about LedBorgs
Post here for queries regarding setup problems with the
new driver free scripts.
We recommend you try using the troubleshooting instructions
here first if you have not already.
Please try to list as much about the problem as you can (OS distribution, versions et cetera), the more we know the easier it is to help :)
Please post any examples you would like to share with other LedBorg owners here :)
Post here for queries regarding setup problems with the old driver based installation.
We recommend you use the new driver free installation, it is easier to setup and allows more colour options from your LedBorg.
We also recommend you try using the troubleshooting instructions here first if you have not already.
Please try to list as much about the problem as you can (OS distribution, versions et cetera), the more we know the easier it is to help :)
Please let us know via the forum if your case is compatible with the LedBorg and we will compile a list. Most cases should fit, but tight cases, low profile and cases with securing mechanisms near the GPIO port may need some modifications to fit.
Please post your photos here!
Submitted by alistair on Sat, 09/30/2017 - 12:24
Hi,
I have a recently bought an LEDBorg and it has been working on my original Pi model b. I have upgraded to the Pi 3 and attempted to get the Ledborg working on this which I thought would be simple but I cannot seem to get it to work. The LED only flases on for a split second when using the bash script.
I am unsure of how to proceed with this. Please could you give me some advise on what to do next?
I have already tried OS reinstallation, installed wiringpi and checked the pins. I moved the LEDborg back to model B and again it worked in there.
Submitted by MattyJ2009 on Mon, 09/04/2017 - 19:53
Submitted by Sexy Pirate on Wed, 08/16/2017 - 19:05
Hi I'm getting this message when starting cheerborg.py from ssh into my pi. It still works but I have to back out of ssh and go back in because it stops me entering any more commands after this message pops up.
./CheerBorg.py:6 DepecationWarning: the wiringpi2 module has been deprecated, please 'import wiringpi' instead.
Import wiringpi2 as wiringpi
Anyone know what this means? Thanks.
Submitted by Belchides on Sat, 06/03/2017 - 20:30
Hi, I just purchased a LEDBORG however my python skills are limited. I was wondering how a basic script to have the led turn on once the unit is powered on would look.
Basically when the unit turns on, I would like a blue light to turn on and remain until it is powered off.
Thanks!
I'm currently working on it through Raspbian but I mainly use the Pi for Retropie.
Submitted by Mark.pepper@dsl... on Mon, 01/09/2017 - 15:04
I have some code written that has been in use for many years that uses the LEDBorg drivers. Is there any way to be able to install and uses these with the latest (Pixel) version of the RasPi OS please? I'd rather not re-write all my code you see.
Regards - Mark Pepper
Submitted by VIRIDIANA CAMPOS on Thu, 01/05/2017 - 00:05
I couldn´t find the storage indications, please help.
Pages
